LAN08ISA 10Mbps ISA Ethernet Card      

ISA Ethernet Card, with Realtek RTL8019AS Controller,

 1 x BNC and 1 x UTP Connectors                      

• Meets PCI Local Bus specification, REV.2.0 or later

• PCI 32-bit Bus Master architecture

• Realtek RTL8029AS MAC controller

• BNC and RJ-45 Ports

• Supports Full Duplex operation

• 100-meter STP/UTP cable using category 3,4 or 5 for 10Mbps

• LED indicator for installation verification and diagnostic purpose

• Optional remote boot ROM available, can be used as a diskless workstation of RPL (DOS/Win95) or PXE (Win98) on NetWare 3.X, 4.X server and Microsoft Windows NT 3.51, 4.x server

• Meets FCC and CE safety standards

• Plug and Play, simple to install

Specifications

• Access method CSMA/CD, 10Mbps

• Standard conformance IEEE802.3 10Base-T

• Bus type PCI

• I/O address automatically determined by configuration space

• Interrupt level mapping BIOS IRQ setup

• Number of ports BNC and RJ-45 ports

• Cable type TX (unshield twisted-pair)

• Network media (cable) 10Base-T: Two pairs of category 3/4/5 UTP up to 100m

• Physical demension (W x H x L)

• Drivers support Microsoft WFW 3.11, Windows 95/98/2000/NT/Me/Novell NetWare 3.x, 4.x 5.x ODIFTP PC/TCP, Sun PC-NFS, NetWare OS/2 ODI Linux & Unixware 7

LAN08ISA-U 10Mbps ISA Ethernet Card                                                                                                                                

• "LAN08ISA-U" is the same as LAN08ISA, with RJ-45 Connector only　

• Talent is a registered trademark of Datanet Ltd.
• All other products and company names are registered trademarks of the respective manufacturers.

For Purchases and Enquiry, please click here or contact us by one of the following ways:
   - Telephone: (852) 2796 2830
   - E-mail: talent@datanet-ltd.com.hk
   - Fax: (852) 2796 5426